Showing posts with label bottle. Show all posts
Showing posts with label bottle. Show all posts

Friday, January 3, 2014

snow globe ornaments

To go along with the Paul Bunyan towelendars and some other things (to be discussed in my next post), I made these cute snow globe ornaments with tiny bottle brush trees and a ton of glitter (both opalescent and silver). I inserted the trees with long tweezers and attached them with hot glue.


I found the bottle brush trees and clear ornaments at Ben Franklin Crafts here locally, which turned out to have ample supplies of both after the other chain stores sold out (also better pricing than JoAnn).

I tried this with both plastic and glass ornaments, and each had some pros and cons.


Mainly, I had more problems with hot glue strings sticking all over the inside of the plastic bulbs, but this also meant that the trees were more secure once they were stuck in place.

The glass bulbs didn't have as many problems with glue strings sticking, but I also had more trees come loose from the bottoms of the bulbs. In addition, I had one glass ball break, so buy one or two extra if you have a set number of people on your gift list.

Again in the pro column (for me) is that the glitter is statically attracted to the inside of the glass, so there's a bit more of a "falling snow" effect on the sides of the glass ornaments than inside the plastic ornaments.


I finished these off with baker's twine loops and tags cut from wood veneer. I purchased a large piece (2 x 5 feet) of wood veneer at the recycled building store for $3, and it cut easily with kitchen scissors. To prevent ink from running in the grain, I drew the year on with pencil. As a bonus, it has a nice handmade look to it.


I'll link you here to my inspiration for this project, last year's Prep & Landing snow globe project from Disney's Family Fun Magazine. I ended up foregoing the bases and using bottle brush trees after seeing a few similar projects on Pinterest, and was happy with the decision. I think my additions of the twine and wood veneer tags are what make them really stand out as a nice tie-in to the Paul Bunyan tales though.


Did you put together any fun Christmas ornaments this year?

Thanks for reading!

p.s. Did I mention that you can make these photos larger just by clicking on  them? You probably already knew that, but I thought I'd mention it.

p.p.s. Did I also mention that I cut our cedar Christmas tree out of our yard this year, Clark W. Griswold style? Yeah, that totally happened.

Tuesday, June 19, 2012

cut "glass" 5-cent pendant shade



I promise, you're going to laugh.



Partially, because yes, I've made another light fixture. And I'm filling up this post with lots of photos of it finished.



The tutorial is just too easy.



The other reason you're going to get a giggle is that this cut "glass" pendant is made from a plastic 2-liter soda bottle.

We don't drink much soda (this is actually a 2-liter sparkling water bottle), so this pendant is pretty much a one-off in our house. Until the next time I need some sparkling water, that is. And because it was a "test" project, I didn't take photos of it in-process. But I really should have. Obviously. Because it actually turned out. Against all odds.



If I make another one, I'll update this post with a step-by-step photo tutorial, but honestly, you can replicate this really easily.



Supplies:

1) clean 2-liter plastic bottle, with label and sticky stuff removed
2) hanging lamp cord kit from the hardware store (mine came from one of the paper lanterns I used to have in the other corner of the living room)
3) low-wattage LED light bulb (DO NOT use a standard heat-producing bulb)


Tools:

1) sharp utility scissors
2) ruler
3) pen
4) rubber band
5) palm sander


Steps:

1) Sand down the surface of the bottle to help diffuse the light and to make your pendant look cool. Wear gloves to protect your hands and work outside.

2) Cut the bottle neck off of the plastic bottle, as close to the top as possible, so that the plug end of your light kit will fit through the resulting hole.

3) Using the rubber band and the ruler to guide your pen, mark a line on the bottle and cut along the line with your sharp scissors. The bottle should be cut long enough to disguise the bulb inside the fixture.

4) Assemble and hang.

And there you have it! No, literally, you can have one. They're really easy and inexpensive.


Other Lighting Projects:

Another Paper Lighting Fixture (Design*Sponge-inspired cupcake liner paper lantern)

The Fanciest Thing in My House (faux capiz shell chandelier)

Lampshade Re-Do with Upcycled Milk Jug (milk jug flower petal lamp shade)

Progress (lamp made from an old cedar stump and thrift store lampshade)



Linking up to:

Handy Man, Crafty Woman

Tip Me Tuesday at Tip Junkie

A Bowl Full of Lemons

Mommy by Day, Crafter by Night

Today's Creative Blog

DIY Show Off

The Stuff of Success


Open House Party at No Minimalist Here

Catch as Catch Can at My Repurposed Life