coffee sack burlap chair reupholstery

You last saw these chairs at Thanksgiving, 2011, when I repainted and upholstered them with some whimsical sheep fabric . . . it lasted a while, but it was pretty dirty and hard to scrub clean.

I recently reupholstered them again with the front and back of a coffee sack for a little change of pace.

 

Easy as pie, just like last time. You'll want to fold over the edge of your burlap, though, and staple through a couple of layers to keep the burlap from warping or unraveling.

 Here are a few more coffee sack projects I've tackled:

Coffee Sack Tree Skirt
Cushion
Lamp Shade
Wall Art

And here's where you can find a coffee sack or two if you're interested in trying this at home!

Thanks for reading!

sketched storage ottoman upholstery

We bought a small wicker storage ottoman a year ago to replace a large upholstered ottoman that had been given to us with our couch. The larger ottoman never had storage, so it was pretty much a useless space hog.

This ottoman, though, has the disadvantage of being made of wicker in a house with cats. The top got pretty beat up in a short amount of time, so I covered it up!

I upholstered the top in painter's canvas, which matches the new couch pillows I made (more on that soon), but to tie it in to the Ikea curtain fabric, I also sketched on the top with a permanent pen.

The result is a little more sketch-y looking than the original, but I think it's a nice tie-in without being too matchy-matchy. I haven't decided yet whether to thicken up the lines or add color or anything; I'm leaning toward leaving it as-is, but things tend to evolve around here over longer periods of time.

If I were to do this project over, I'd use more batting to obscure the wicker, but generally I'm pretty happy with how this came out. I'm trying to convince the cat to use the scratching posts exclusively, but cats are notoriously unreasonable. Here's hoping the sides of the ottoman hold up!

Thanks for reading!

p.s. You can make these photos larger by clicking, if you'd like to see more detail!

little tree stool

This turned out cute by accident. Somewhere around here is the basketball colored and textured vinyl remnant I intended to use for reupholstering this little 1970s caster stool.

I picked the stool up at a thrift store awhile back for a crafting competition, but never got a chance to use it for a project.

I meant to paint it, too, but I wanted to get the seat covered, first, to see what color might look best with the new upholstery.

Four little screws held the pad on from beneath. A phillips head screwdriver took care of them in about two minutes.

 Here it is, plain brown without padding.

Here's how the other half lives, when the other half is separated from its stool.

And here's the seedy underside, riddled with a hundred staples.

I searched my stash high and low for that basketball vinyl, but couldn't find it. What I found instead was a thrift store upholstery fabric remnant printed with modern leaf outlines in shades of green. And I thought, suddenly, that it would be a much better match to the two Ikea stools that will flank it at the train table.

I cut the fabric to cover, plus about an inch and a half "seam allowance" to wrap around and staple.

So modern! So graphic! So summery! So . . . who designed it and where did it come from? (Google image searches turn up nothing.)

The secret to successful upholstery is to pull tightly, staple securely, and keep your curves smooth. I always start with a staple on one side (call it the west side), then pull the fabric taut and staple directly across from it (east side). Then repeat for the other two points on an imaginary compass rose (north and south).

I keep at it, stapling opposite points all the way around, pulling tight, tight, tight along the curve for a smooth edge. I never need a hundred staples; I think I used maybe twenty for this stool.

And here it is, finished. I could have painted the base white or some shade of green, but in the end,  it didn't need painting after all. The twiggy brown legs are pretty much the perfect complement to the leafy upholstery. My little Peter Pan loves it, and I imagine the Lost Boys would too.

Thanks for reading.

new chairs for thanksgiving dinner : under $25

Our beautiful dining room table was wedding gift from one of my sets of parents. It has now filled two too-small kitchen dining spaces with its gorgeous girth.

When planning to have the in-laws over for Thanksgiving dinner this year, our lack of comparably solid, beautiful chairs became more noticeable. Up until now, we've had a folding chair and four little Ikea Stefan chairs I bought on clearance three years ago. Cute, yes, and mostly serviceable, though as a salesperson pointed out, built to support the weight of your average Swede. A climbing toddler can topple one of those suckers without even trying (although he does try, and frequently).

I headed to the Habitat for Humanity Restore and the Goodwill (toddler in tow, for topple-testing!), and found two solid-wood-constructed, heavy-duty chairs. Both were half-price on different sale days, and they didn't match. Different upholstery, different wood finishes and different builds. My mission? To make them look a little more like a "set".

Before: Stained upholstery, battered finishes.






After: New upholstery, new finishes.






To replicate this project:

1) Remove extraneous padding (like the back pad on the first chair, which was held in place with staples and hot glue) and toss.




2) Turn your chairs over and remove the screws that hold the upholstered seats in place. Set aside the screws, and take the seat off of the chair

3) If the chairs have been previously re-covered, remove the excess layers of fabric and staples. Set aside the seats and the screws.




4) Stretch new fabric over the seats. Turn face down, fold fabric edge under to prevent fraying, and shoot a few staples along that edge of the new fabric, making sure the staples go through all layers of fabric and into the wooden seat bottom. Pull tightly, and tack down the opposing edge in the same manner.

5) Repeat for other two edges. At corners, some people use a "package fold" but I don't prefer the square-ish edges this leaves. Instead, I make about a dozen tiny folds and overlaps, sort of gathering the fabric with my fingers as I staple. Set seats aside.

6) Sand or de-gloss the chair frames outside, then paint with a spray-paint/primer in one, using even strokes and building up several light layers. These dry more quickly than a single, heavy layer, and also leave a nicer finish.

7) Let dry / cure / air-out for a couple of days. Then bring back inside and reassemble to the newly upholstered seat bottoms.

Ta-dum! New dinner chairs. The kiddo loves them, and so do I!

You can find the fabric here, courtesy of Spoonflower (more about that in a future post). It's meant to be a stuffed animal kit.

The spray finish is a color called oil-rubbed-bronze, a brownish black with a very subtle gleam of metal flake. It's a satin finish.












Any questions about my process? Leave them in the comments section below and I'll do my best to answer.


(p.s. you can make these photos bigger by clicking on them . . . but you probably knew that!)



Pin It