a mother's day planter with new house numbers

The kiddo and I dipped into our scrap lumber pile to put together a new planter + house numbers for his grandma for Mother's Day. Actually, it was partially a birthday present for his grandpa, too, whose birthday had been a couple of weeks earlier. They've been needing something like this for awhile as someone (they both swear it wasn't them) had run into the previous house number post quite awhile ago.

Here's the before and after:

 

The Mr. picked up some potting mix and we picked out a plant at the hardy plant sale (it's an ornamental grass that's drought resistant and will eventually have golden plumes on top), but otherwise, we had all of the materials on hand.

If you make a planter out of your own scrap pile (old fence boards, leftover trim, etc.) your dimensions will vary based on what you have on hand, but here's a general guide:

Decide on your dimensions and sketch it out. A sketch will help solidify your plan and guide you as you work . I decided to make this planter three boards wide and two feet high, to make maximum advantage of our leftover and recycled wood.

Making a four-sided box planter, I constructed two sides with the trim overhanging a bit to cover the ends of the other two sides. I used 1x2 lumber scraps leftover from another project screwed onto the top and bottom.

On the backs of these two pieces, I added a couple of scrap lengths of 2x2 to the edges to act as interior braces.

The other two sides were built with the trim even with the ends.

Then I screwed the four sides together using the 2x2 braces to make everything secure, and screwed bottom boards in place. Spaces between the boards make for efficient drainage.

(Grainy early-evening photo alert!)

 

Four short stubs of pressure-treated 2x4 (leftover from a fence project) make great rot-resistant feet (the Mr. nailed them in place from the inside), and I let the kiddo help me stain the planter. He helped me pick the stain color, too. (It's Benjamin Moore Arborcoat in redwood color).

I managed to stop him from coating the front panel, though, which left room for the house numbers.

(If you make a measurement error {like I did} when planning the sides, some lengths of cedar garden stakes can be added at this point, too, to cover the corner gaps and add a nice design element.)

Not pictured here is the layer of black plastic I stapled to the inside (with holes cut through for drainage) to protect the wood from the wet dirt. Most of the planter is made with cedar fence board scraps, but my hope is that the plastic will keep the supports from rotting right away.

We waited until we had the planter in place before filling with soil, then planted it and added about six inches of mulch to the top to keep the plant happy and the soil moist.

As with any project, there are things I'd do differently next time around (like hiding the screws by screwing from the other side, measuring better, stenciling instead of free-handing), but the good thing about building anything for the first time is that you learn little things that will help you out the next time. And you know what? No one who loves you will complain about small imperfections anyway.

Thanks for reading!

Linking up to:
My Repurposed Life

what's happening in the alley

There's an awkward area of our yard that's about six feet wide and borders the neighbors' property . . . where, in defiance of -- I don't know -- a million local building codes, they've built an addition about a foot away from the property line. It was there before we moved in, it'll be there after we leave. Unless the branches of our nut tree fall and crush it. I'd kinda love to see what kind of insurance claim would attempt to be filed on something like that.

Anyway, I digress. This awkward area of our yard is something I've ignored since moving in several years ago because: a) I'm an expert at avoiding things that drive me bananas; b) it's a very narrow area; and c) we had to break into our house through the fireplace one Fourth of July, and the alley has been full of rubble. 

That last bit is a funny story; it starts with an unusable sixties-era fireplace separating from the foundation (Ha ha! Funny already, right?). The plot thickens when we lock ourselves out of the house on a holiday weekend, then, to regain entry, bust through the decades-old brick and mortar with a sledge to the shock and awe of the house cats. Finally, in the conclusion, your intrepid hero and heroine patch up the wall and, eventually, re-side the entire house, but leave a pile of urbanite, pea gravel, concrete blocks and river stones in the alley. For a couple of years.

It's a major unfinished project to just have laying around, and I started to finally tackle it because my kiddo is getting older and more exploratory, and I don't really want to leave him to the mercy of (possible) rubble-dwelling black widows and (possible) rusted nails from our roof replacement. 

Here's a sneak peek, then, of some of the projects going on in the alley. My goal is to use mostly recycled materials and stuff we have on hand to beautify the alley and make it safer to traverse. This trellis, for example, is something I built using some cedar garden stakes from an estate sale (25 for $5!) and a busted extension ladder.

The raised beds are built of fireplace rubble ("urbanite") and filled with dirt from another spot in the yard, mulch from the city's Free Wood Chips pile, and plants from the local garden center's end-of season sale plant rack. I searched out shade-happy vining plants to help fill in that trellis.

And I made these planters out of a couple of old buckets and some split garden hoses. 

There's a lot of work to do here still, but I'm feeling good that progress is happening. It was a scary, weedy, rubble-y mess that was in desperate need of attention . . . and now it's getting a little. I'll definitely be back with updates and details as this project progresses as it's far from finished; I have so many ideas! So much to do before the weather turns! So much stuff for my kiddo to get into while I'm slaving away in the alley! What about you? Are you trying to make something out of nothing this summer, too?

Thanks for reading.

p.s. Hey! You can make these images larger just by clicking on them, but you probably already knew that, clever you.


Linking up to:

Catch as Catch Can at My RePurposed Life

pinterest challenge: vertical hanging planter (upcycle!)

Pinterest, I've said it before and I'll say it again: you'll be the death of me.

On the other hand, I'm lucky enough to get to participate in the Young House Love/Bower Power Blog completely unauthorized Pinterest Challenge because of you, so maybe it's a draw?

Okay, fine. I love Pinterest. I've found it an endless source of inspiration and ideas. The only trouble I have is in distilling the content; I want to do everything. Like vertical gardening, for example. Wall pockets, hanging planters, cinder blocks, you name it, I want to make it.

original pin here

inspiration board dedicated to vertical and hanging planters and gardens here

Distill! Distill!

I took all those inspirational images and tutorials and made this: an upcycled wall planter homage to wall gardens. It wasn't exactly free, but it was pretty inexpensive, and mostly used materials (and plants) I already had on hand.

Materials:

Old iron planter basket (sans chains)

burlap coffee sack remnants

soil

pine shavings

hardware cloth or chicken wire remnant

awning remnant

hens & chicks

wire

thyme

heavy coat hook 

Get an old iron planter basket (mine cost $2 at Bring). You'll need to acquire this first, as you'll use it to determine how large to cut your burlap and hardware cloth. You could also use an old bicycle wheel; one of the pins above makes a spinning planter with one. (Note: Bring marks prices with a paint pen; I've had good luck removing their prices with a Magic Eraser.)

After testing placement, replace your chintzy picture hanging hook with a nice, sturdy coat hook.

Sew a "pillow" from old coffee sack burlap, using twine pulled from the sack to sew it up. Turn it inside out and fill with a mixture of potting mix and pine shavings (to make it more lightweight).

Stitch the pillow closed and stuff it into your planter basket.

Cut some hardware cloth to the approximate size and shape of your container's back using tin snips. I had a large piece leftover from an old playhouse we tore down awhile back; chicken wire would work well, too. Cutting it down to an approximate size first makes it easier to work with when you're ready to do more exact cuts later.

Set aside your hardware cloth for the next step.

If you'll be hanging your vertical wall planter on a surface you want to protect marginally, you should add a waterproof layer so that the dirt and water don't soak through the burlap, causing stains and rot. You can use an old piece of tarp, or one of those poly pet food bags, or (like me) a piece of an awning destroyed in a windstorm. Cut it out and place it on top of your dirt pillow.

Trim down the hardware cloth to fit, then tuck it in place over the waterproof layer and use wire and some needle nose pliers to attach it to the basket.

Turn the pod over and lay it flat to begin filling in your plants. 

                               

I trimmed some of my hens & chicks plants down, and also added a divided thyme seedling and a whole lotta moss. (We'll see what survives!)

Poke or cut holes in the burlap and thread roots or runners into the holes.

 Fill in around plants with moss.

I hung mine up right away for photos, but pretty much universally, it's agreed you should water it and leave it flat for a couple of weeks to allow the plants to take root. So after taking some pictures, I took the planter down again and laid it flat to do exactly that.

Patience is a virtue.

Thanks for reading, and thanks to Sherry and Katie for issuing the Pinterest Challenge! It's always good to have the chance to mark a project off my list . . . especially one that first caught my attention over a year ago. 

Linking up to:

Young House Love

Decor and the Dog

Bower Power Blog

The ReModeled Life

Ginger Snap Crafts



The CSI Project

snail trails and hens & chicks (making a succulent planter from a repurposed cast iron lamp base)

Sometimes the kiddo and I stop by Bring at a certain time of day to do a little train watching. There's a train bridge that runs right by the parking lot, and my kiddo loves to watch all the train cars go by and hear the train song. We mostly spot freight trains while parked there, which are extra long and usually loaded with timber rolling out of our state and into another. A couple of times, we've waved to the engineer, and he's waved back. Very fun for a two-year-old and his nutty mama.

I accrued a credit at Bring by filling up a frequent buyer card, mostly by buying Metro Paint during our house re-painting project. Because of this, lately, if we're there to watch trains, the kiddo and I will duck in for a few minutes to poke around and see if anything interesting turns up, even if we don't have anything on our list to shop for. Which is how we found this little rusty cast iron snail lamp base (missing its shell shade) for $5.

A.k.a. free, since my credit is kinda large.

And because I like to run against the grain, this lamp base did not, in fact get used as a lamp or a lighting fixture or anything of that nature. I had another use in mind for her anyway, but typically I won't allow electrical current to be introduced to anything that shows significant evidence of having been left in the rain (rust). To my mind, that makes all the lamp-y bits suspect. My suspicions were confirmed while I was taking it apart; corrosion, rust, etc. on all of the electrical parts. Not safe to plug in.

But that's okay. I was going to take all those bits out anyway, to make this snail into a planter for some succulents.

I used a screwdriver to get out any screws that weren't completely rusted in place, then used a pair of needle-nose pliers to loosen the nut holding the wires to the bulb socket. All this in an effort to make the cord small enough to slide out of the holes it was running through.

Success! Here's the snail, sans wires and lamp kit, about ten minutes after starting this project.

Now, the lamp is pretty small, but the base is concave to allow for a little extra soil. I had succulents in mind because they have great shapes to them (some are very architectural) and because they don't root very deeply. 

But late, late summer and early fall are terrible times to shop garden centers for succulents in the Pacific Northwest, mostly because the rains are coming. They'd all been gotten rid of. I spotted some potted ones at Trader Joe's, but didn't want to pay for a pot I'd then be tasked to find another use for. I knew I'd be setting myself up for a "mouse & cookie" type situation there, so I nixed the idea in favor of using a couple of over-the-edge-of-the-pot chicks from a hens & chicks plant my friend Denise gave me six years ago when she left town. You can see their spindly, hair-like roots, ready to get into some ground, finally!

 I ended up placing the planter right over the space between two blocks in my low garden wall. That way, if the little chick becomes a hen and sends out her own offspring into the world, there'll be plenty of soil and mulch underneath and nearby to sustain her little family.

My snail is just wet from watering here, but it does give me the idea to perhaps give her a little coat of spray lacquer to help preserve her a bit better. The color is just about right.

Happy in her new home, with friends nearby.

Thanks for reading!

p.s. you can make these photos larger by clicking on them, but you probably already knew that.